Making a phone call, Receiving a call — accept (and end), Mute (or unmute) microphone during call – Ram Trucks 2015 ProMaster Commercial - Uconnect 5.0 Manual User Manual

Page 32: Transfer ongoing call between handset and vehicle, Transfer ongoing call between handset and, Vehicle

Advertising
background image

• Both the SIM card and the mobile phone’s phonebook

is downloaded. SIM card phonebook is not part of the

Mobile phonebook. It is possible that the SIM card

phonebook may not be downloaded depending on the

mobile phone and the phone’s software.

• This downloaded phonebook cannot be edited or

deleted on the Uconnect®. These can only be edited on

the mobile phone. The changes are transferred and

updated to Uconnect® Phone on the next phone

connection.

Making A Phone Call

Push the “Phone Pick-up” button

on the steering

wheel.
After the BEEP, say “dial” a number (or “call” a name).

Receiving A Call — Accept (And End)

When an incoming call rings, or is announced on

Uconnect®, push the “Phone Pick-up” button.
To end a call, push the “Phone Hang-up” button on the

steering wheel or the “Answer” button on the radio

touchscreen.
Mute (Or Unmute) Microphone During Call

During a call, push the “Voice Command” button

on the steering wheel.

After the BEEP, say “mute” to mute the microphone (or

“mute off” to un-mute the microphone).
Transfer Ongoing Call Between Handset And
Vehicle

During a call, push the “Voice Command” button.
After the BEEP, say “transfer call.”

4

Uconnect® PHONE 31

Advertising
This manual is related to the following products: