Ram Trucks 2015 ProMaster Commercial - Uconnect 5.0 Manual - Manual (Page 69)

2. Your current position
3. Road sign information or the next street name
4. Remaining journey time, the remaining distance and
your estimated arrival time
Press this part of the status bar to open the Route
Summary screen.
To change the information shown in the status bar,
press the “Status bar” button in the Settings menu.
5. Speed limit, if known
To see the difference between your preferred arrival
time and your estimated arrival time, check the Lee-
way checkbox in the Status bar settings.
Press this part of the status bar to switch between a 3D
map and a 2D map.
6. Name of the street you are on
7. Navigation instruction for the road ahead and the
distance to next instruction
If the second instruction is less than 150m after the
first instruction, you see it shown immediately instead
of the distance.
Press this part of the status bar to repeat the last voice
instruction.
Driving View Symbols
Navigation instructions muted
This symbol is shown when the navigation
instructions have been muted.
To hear navigation instructions again, push the middle
panel in the status bar.
68 NAVIGATION