Ram Trucks 2015 ProMaster Commercial - Uconnect 5.0 Manual - Manual (Page 78)

NOTE: You cannot move an unvisited waypoint into a
list of already visited waypoints.
Deleting A Waypoint
To delete a waypoint, do the following:
1. Press the touchscreen to bring up the Main Menu.
2. Press the “Change route” button.
3. Press the “Travel via” button.
4. Press the waypoint you want to delete.
You will see a touchscreen with the name of your
waypoint at the top.
5. Press the “Delete” button.
Your waypoint is deleted and you are immediately
returned to your list of waypoints.
Reactivating A Waypoint
NOTE: You can only reactivate a waypoint that has
already been visited. Visited waypoints are greyed out.
To reactivate a waypoint, do the following:
1. Press the touchscreen to bring up the Main menu.
2. Press the “Change route” button.
3. Press the “Travel via” button.
4. Press the visited waypoint that you want to reactivate.
You will see a touchscreen with the name of your
waypoint at the top.
5. Press the “Reactivate” button.
The waypoint is deleted and reinserted into the list of
waypoints that haven’t yet been visited.
7
NAVIGATION 77