Ram Trucks 2015 ProMaster Commercial - Uconnect 5.0 Manual - Manual (Page 76)

When you enter a city center as a waypoint, the route
planner will plan a route via the area around this city, not
via the location of the city center. The route planner may
fail to find a route via a city center that has an awkward
location w.r.t. the current route.
Adding The First Waypoint To Your Route
To add the first waypoint to your route, do the following:
1. Press the touchscreen to bring up the Main menu.
2. Press the “Change route” button.
3. Press the “Travel via” button.
NOTE:
You can also use Voice control to add Waypoints.
4. Choose the location for your waypoint from a choice
of Home, Favorite, Address, Recent destination, POI,
longitude/latitude, or position of last stop.
On the route summary screen, a message confirms that
the route is being recalculated to include the way-
point. In the Change route menu, the Travel via button
changes to show that you now have one waypoint on
your current route.
NOTE: The maximum number of waypoints you can add
is three.
Adding Further Waypoints To Your Route
To add more waypoints to your route after the first one
has been added, do the following:
1. Press the touchscreen to bring up the Main menu.
2. Press the “Change route” button.
3. Press the “Travel via” button.
NOTE:
You can also use Voice control to add waypoints.
4. Press the “Add” button.
7
NAVIGATION 75