Sms message reader, Sms message reader activation/deactivation – Ram Trucks 2015 ProMaster Commercial - Uconnect 5.0 Manual User Manual
Page 33
SMS Message Reader
The system can read the messages received by the mobile
phone.
To use this function the mobile phone must be support
the SMS exchange function via Bluetooth®
If this function is not supported by the phone, the
corresponding
button is deactivated (greyed out).
When a text message is received, the display will show a
screen where the options “Listen,” “Call” or “Ignore” can
be selected.
Press the
button to access the list of SMS messages
received by the mobile phone (the list displays a
maximum of 60 messages received).
SMS Message Reader Activation/Deactivation
The SMS message automatic reading function can be
activated/deactivated by pressing the corresponding
button on the display, which is shown after pressing the
phone selection button.
NOTE:
On some mobile phones, to make the SMS voice
reading function available, the SMS notification option
on the phone must be enabled: this option is usually
available on the phone, in the Bluetooth® connections
menu for a device registered as Uconnect®. After en-
abling this function on the mobile phone, it must be
disconnected and reconnected with the system to make it
effective.
32 Uconnect® PHONE