Care and cleaning, General, Temperature probe – Sears 89950 User Manual

Page 37: Caution, Metal rack, Grease filters

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CARE AND CLEANING

GENERAL

For best performance and safety, keep the oven clean inside and outside. Take special care to keep the inner door

panel and the oven front frame free of food or grease build-up.
NEVER USE ROUGH POWDERS OR PADS. Wipe the microwave oven inside and out, including the hood bottom
cover, with a soft cloth and a warm (not hot) mild detergent solution. Then rinse and wipe dry.

Use a chrome cleaner and polish on chrome, metal and aluminum surfaces.

Wipe spatters immediately with a wet paper towel, especially after cooking chicken or bacon.

Clean your oven weekly or more often, if needed.

Temperature Probe

Remove the temperature probe from the socket after each use.

CAUTION

Use a pot holder because the wire, plug, and sensor sections may be hot.

Clean the probe with a mild detergent solution. Then rinse and wipe dry.
Clean the sensor with a soft, damp cloth. Dry before using again.

Metal Rack

Remove the metal rack to clean it at the sink.
Use a mild detergent solution. Then rinse and wipe dry.

Grease Filters

Remove the metal mesh grease filters on the hood bottom cover for washing at the sink. To remove each filter:
1. Grasp the tab at the end of the filter, as shown.

2. Slide the filter toward each side of the oven.
3. Pull it downward and out.

Use a warm detergent solution, rinse and wipe dry.
DO NOT USE AMMONIA to clean an aluminum mesh filter.
Do not run the hood fan without the filter.

To reinstall the filter, slide it into the side slot, then push up and toward oven center to lock.
The filter should be completely dry before reinstalling into the oven.

Vi

37

Advertising
This manual is related to the following products: