Speaker connections, Connecting the speaker cables, Connecting the front and rear (surround) speakers – Onkyo TX-SV535 User Manual
Page 10: Conrwemi^cif, Speaker and subwoofer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Speaker connections
1. 8mm
Unsc'Tew.
Insert wire.
Press down the lever.
Insert wire.
Return the lever
Connecting the speaker cables
When using banana plugs, make sure the speaker terminal screws are
screwed in firmly before inserting the banana plugs.
NOTE:
Speaker terminals on European models are not banana plug compati
ble.
NO
NOTE:
To prevent damage to circuitry,
never short-circuit the positive
(-r) and negative (-) speaker
wires.
Connecting the front and rear (surround) speakers
Left rear
Right rear
If you want to use Surround
effects, the rear and Center
speakers must be con
nected. (Surround effects
can be heard even if a center
speaker is not connected.
To the front speaker in
the sub-room
(Refer to pages 14, 15)
ConrweMi^cif
Active subwoofer
speaker and subwoofer
Front L (A)
Front R (A)
■ Speaker impedance
FRONT MAIN:
6 ohms min./speaker
CENTER. REAR, FRONT REMOTE: 8 ohms min./speaker
10