Scan, Ртуяр, Receiving rds traffic information – Onkyo TX-SV535 User Manual
Page 23: Displaying radio text (rt), Receiving rds (european model only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving RDS (European model only)
SCAN
РТУЯР
DISPLAY
How to search for a station which broadcasts
your favorite category (PTY scan)
1. Press the PTY/TP button, to select “PTY”.
If the station you are receiving is not broadcasting RDS, "Not
RDS" (this is not an RDS station) will be shown on the display.
2. Use the ◄ DOWN TUNING UP ► buttons to select the pro
gram type (PTY) (for example, “ROCK M”).
See the PTY description on the previous page.
3.
Press the SCAN button to start searching for the chosen PTY
station. When a station is received with the desired PTY, the scan
ning stops for appro.ximately 3 seconds, before the unit starts scan
ning again.
4.
When the desired station is reached, press SCAN button again
to stop scanning.
Receiving RDS traffic information
1. Press the PTY/TP button to select “TP”.
If i': ~ P is shown on the display, it indicates that the current sta
tion is broadcasting traffic information.
2. Press the SCAN button to start searching for a TP station.
When the unit receives a TP station, it stops scanning. If the unit
cannot receive any TP station, "Not find" (cannot find the station)
is shown on the display.
DiSPtA-^
I
i
Displaying Radio Text (RT)
If the station you are listening to is not an RDS station, this function
cannot be used.
1. Each time you press the DISPLAY button, the display changes
as follows.
|—>■ Frequency
Radio Text «—
Character or Program
Service Name
If the current station you are listening to is not an RDS station, only
the frequency of the station and the characters (see pages 24) appears.
(If there have been no characters entered, only the frequency is
shown.)
When RT is received, it can sometimes take up to 15 seconds (more or
less) to show RT on the display.
Sometimes the following messages will be shown on the display.
Wait: When the information is received, the characters will scroll
across the display.
No text: this appears for
3
seconds and indicates that even though an
RDS station is being received, there is no RT information included.
23