Onkyo TX-SV535 - Manual (Page 19)

Listening to your favourite source
Using headphones
Stereo headphones with a standard stereo jack plug can be connected
to the PHONbS jack. The sound heard through the headphones is the
same sound that cun be heard from the Front speakers, although it
may be slightly different from what is heard from the speakers when
the Surround mode is used. (The sound from the headphones may
sound a little distant.)
Explanation of the buttems
POWER MASTER VOLUME
POWER
SPEAKERS
MAIN/REMOTE
VOLUME A / T
Power button (POWER) and STAND-BYYRECEIVEI) indicator
I'he STAND-BY/RECFdVED indicator comes on when the ,AC power cord for this unit has been inserted in an outlet.
fills indicates that this unit is standing by toi- operation. Press the power button will turn the main unit on. then this indicator goes off. The
indicator also lights when a signal is received from the remote control.
Speaker selector buttons (SPE.AKERS MAIN/REMOTE) and indicators
.MAIN button..................This button turns on or off the speakers connected to the MAIN. CENTER and REAR terminals.
When the speakers are turned on, the MAIN indicator lights up.
REMOTE button ........... rills button turns on or off the speakers connected to the REMOTE terminals.
When the speakers are turned on. the REMOTE indicator lights up.
furn on these speakers when using multi source. (See page .fO.i
Master volume control knob (MASTER V'OLUME)
Use this knob to adjust the uiluiiic of the Eront, Main. Center, Rear (Surround) speakers.
Tone and balance controls
freble. bass and selective tone are effectively only for the Front L and R speakers.
Fhe hesi results are obtained from DOLBY PRO LOGIC Surround when the center and front L and R speakers contain the same amounts of
mid and high frequencies. As the treble and bass control do not affect the Center speaker, adjust the tone controls for the Front L and R
speakers to match the sound giv en by the Center speaker. Because of this, we recoiiiiiiend the use of a good qualitv center speaker.
• Bass control knob (BASS)
Adjust to strengthen or weaken bass response.
• Treble control knob (TREBLE)
Ad)ust to strengthen or weaken treble response.
• Selective tone control button (SELECTIVE TONE) and indicator
The selective tone control is used to clearly reproduce ultra low and high frequencies, and only affects the Front speakers.
• Balance control knob (B.AL.ANCE)
Use the balance control knob to adjust the relativ e volume levels of the right and left front Main speaker systems. This adjusts the relative
v olume level of the Eront Main speakers only.
19