Onkyo TX-SV535 - Manual (Page 17)

Control positions and names
Remote control
Sleep button (SLEEP) (Remote control transmitter only)
Press to set the power off timer. The sleep timer is a function
which turns off the power to the system from the time it is set.
When this button is pressed. ‘'90 MIN" is displayed for 3 seconds,
and the power goes off 90 minutes later. Kach time the button is
pressed during 5 seconds, the timer setting changes, by 10 minute
intervals, such as 80. 70. 60 .... While the sleep timer is operating,
the ¡SLEEPI indicator is lit. If the sleep button is pressed during
this time, the amount of time remaining on the sleep timer is dis­
played. and if the button is pressed during that display. 10 minutes
w ill be subtracted from that time. If the button is pressed when the
panel display shows 10 minutes or less, the sleep timer is can­
celled. and the power is not turned off.
Power button (POWER) [18,19]
i Input selector buttons [18, 30]
(TAPE-1. TUNER. PHONO. CD. TAPE-2. VIDEO-1. VIDEO-2.
V1DEO-.3)
When the TUNER button is pressed, the station which was
received previously is recalled. Selection of AM or EM should be
done on the main unit.
Tape oeration buttons (DECK-A, DECK-B)
These buttons control ONKYO double cassette tape decks that can
be remote controlled. Use the DECK-B buttons to control single
cassette tape decks with the iR! mark
•/|| : When this is pressed, the recording stand-by mode is
entered.
: The tape plays, moving from right to left. or. in the record­
ing stand-by mode, recording begins.
■ : Interrupts all operations.
: The tape plays, moving from left to right, or. in the record­
ing stand-by mode, recording begins.
: Fast forward from right to left.
►► : Fast forw ard from left to right.
CD operation buttons (CD)
These buttons are used to operate an ONKYO CD player with the
Rl sleepmark.
► : Press this button to play the CD player,
i! : Press this button to pause the CD play back. To resume
disc play, press the ► button.
DISC : Press to use for sequential selection of discs in the order
they were loaded on the CD changer.
■ : Press this button to stop the CD player.
; Press this button to go back to the beginning of the current
(rack and again to skip back to the previous track.
: Press this button to skip to the next track.
Test tone button (TEST) [26]
Surround mode button (SURROUND MODE) [25, 26]
Delay time button (DELAY TIME) [25, 26]
Speaker selector buttons
(SPEAKERS MAIN/REMOTE) [18, 19, 30]
Multi source button (MULTI SOURCE) [30]
Multi source level up/down buttons [30]
(LEVEL
A / T )
Group selector button (GROUP) [21]
Preset memory UP/DOWN buttons (PRESET A / T ) [21]
Audio muting button (MUTING)
This button temporarily switches off the sound from the speakers
or headphone by operating this unit audio muting circuits. The
audio muting indicator ".AUDIO MUTING" will flash. Pressing
the button again or using the POWER button to turn the power on
w ill turn off the audio muting.
• Pressing this button does not mute the sound ol the multi source.
Press the SPEAKER.S REMOTE button to mute the sound of the
multi source.
Volume buttons (VOLUME A / T ) [18, 19]
Center level up/down buttons (CENTER LEVEL A / T )
Rear level up/down buttons (REAR LEVEL A / T ) [26]
17