Tascam DA-38 - Manual (Page 30)

SECTION 8 : CONTROLLING THE OA-38 FROM MENUS
(3) How to Record the Sine Wave Tone on Tape
• The built-in oscillator must be switched on at the
Y Press the REC FUNCTION switch of the track you
want to record on. The associated LED will start
blinking.
2 To begin recording the sine wave tone from the oscil­
lator, hold RECORD and press PLAY. The RECORD
button will light solidly, and also the REC FUNC­
TION LED that was blinking.
^ To stop recording, press STOP.
* To switch the built-in oscillator off, press either the A
or the ▼ key to change the "on" display to "of F" at
the "uSr" menu.
8‘3. Initializing the Backup Memory
Follow these steps to initialize or reset the backup
memory.
Y Press SHIFT and the associated LED will start blink­
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
□
2 Press MENU as many times as necessary to change
the display to look like this:
I n t.
^ Press either the A or the T key and the display will
change to look like this:
r E R d
y
4 Press either the A or the T key once more. The
initialization process will start, and when it is
complete, the display will change to look like this:
d o \ n E
^ Press SHIFT and the associated LED will turn off, the
display being switched back to show the ABS time.
8*3