Loader specifieatlohs – Troy-Bilt 14066 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LOADER SPECiFieATlOHS
Specifications shown are based on ASAE Stan
dards. Specificaiions may vary with tractor
model, front axie configurations, tire size op
tions and type of Attachment.
Front Tires..... ........................................................................................................16-6.50 (4 piy) 28 psi
Rear Tires................... .......................................................................................... 23-10.50 12 psi
A
Maximum Lift hi .....................................................................................................63.5”
B
Clearance with Bucket Dumped........................................................................... 49.0”
C
Reach at Maximum Height............................................................................ ........ 15.5”
D
Maximum Dump Angle................................................................................. ......... 37 °
E
Reach with Attachment on Ground........................................................................40.75”
F
Attachment Rollback Angle................................................................................... 17°
G
Digging Depth 3elow Grade.................................................................................. 2.0”
H
Overall Height in Carry Position...................................................................... ...... 42.75”
L Length of Attachment................................................................................................ 15.0” (Norn.)
Lift Capacity to Full Height.................................................................................... 350 lbs.
Breakaway Capacity................................................. .................................... ........ 700 lbs.
Bucket Cylinders...................................................................................................2.0” x 8.5”
Lift Cylinders................................................................................. ........................ 1-5” x 11.5”
Relief Valve Pressure Setting............................................................................... 1400 psi
Material Bucket.....................................................................................................40”
CYCLE TIMES
Idle
1/2 Throttle
Full Throttle
Lift Boom
7,6 sec.
2.9 sec.
2.4 sec.
Lower Boom
4.1
2.2
2.1
Dump Bucket
3.4
1.4
1.3
Retract Bucket
5.1
2.0
1.7
40-1