Operatiok, Loader hydraulic controls – Troy-Bilt 14066 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATiOK
Loader Hydraulic Controls
Loader Hydraulics are activaiad by Engaging
Tractor front P.T.O. The P.T.O. switch is located
on the RH side of the instrument Panel.
The loader Hydraulic Valve Features Single
Lever Control. Refer to figure 5 for reference to
Loader Control Functions.
The Loader Hydraulic Valve Lift Cylinder circuit
incorporates a “Float” position which allows the
loader bucket to follow ground contours. The
“Float” position is engaged by shifting the con
trol lever forward into “Detent”. The Loader
Hydraulic Valve will remain in “Detent” until the
operator pulls the control lever out of the “De
tent” position.
Refer to “Scraping” operation for recommended
use of “Float” position.
Single Lever Control
Fig. 5
70-2