Troy-Bilt 14066 - Manual (Page 12)

LUe SiCATiOl AMD MAIMTEI-JANCl
vice/Maintenanca Opera-
—ad off ground. For addi­
to tractor components remove
Do,not perform an, ,
tions witr ioader raised off ground. For addi
tional acc3— -------- -----------------------—
loader.
important;
Lower the loader to the ground and relieve
pressure in loader hydraulic lines prior to perfor­
ming any service/maintenance operations or, the
tractor or loader.
Av
ktWARNING! Escaping fluid under pressure
can have sufficient force to penetrate the skin,
causing serious injury. Before disconn acting
lines, be sure to relieve all pressu.^a. B ore
applying pressure to the system, be sur ill
connections are tight and that lines, pi . 33 and
hoses are not damaged. Fluid escaping from a
very small hole can be almost invisible. Use a
piece of cardboard or wood rather than your hands
to search for suspected leaks.
See a Doctor at once if injured by escaping fiuid.
Serious infection or reaction can develop
if cor­
rect medical treatment is not administered im­
mediately.
A.
^CAUTION. Do not operate the loader If the
fittings are leaking or if the hoses are damaged.
A sudden line burst could cause the Boom
Assembly to drop suddenly, causing damage to
the tractor or loader or injury to personnel.
kCAUTlON. Operate the loader from the trac­
tor seat only.
»CAUTION. Do not stand or walk under a
raised attachment. Accidental movement of
control lever or leak in hydraulic system could
cause Boom Assembly to drop, causing severe
Injury.
Refer to “Lubncatson .'cd 3 ienanca Ch:;- "
for quick reference tc '-’air.. 3 ice Opera!; 5.
Figure 4.
Check hydraulic system fluid le**, il. Lower ioe
to ground 3:'d re+'ict bucket fully. Rem ;
Overflow plug ioca >d on ‘'’s ,.a face of FH
Loader
upriyri/Rsf: .,:''-oir. -iL reservoir to
C'/erlcw. Use Type ’A” hydraulic fluic or
equivalent.
Note:
When checkina Hydrai:''C c ste, on _ev=
Loader ¿nouid bs Oi t h g r c _nd and buck ■ fu, /
retracted. {All Cytinoers In Retracted pcs. ..:n.)
Drain and replace Hydraulic fluid and Filter every
300 hrs./annually. Use Hydraulic Fluid Reservoir
Return port to Drain Reservoir.
Service interval should be shortened if loader is
operated in adverse conditions.
Use Type “A” Hydraulic Fluid or Equivalent.
Grease ail loader pivot points daily (10 hours).
Refer to Tractor Operators Manual for lubricant
recommendations.
Inspect hydraulic hoses, connections, control
valve and cylinders for evidence of leakage.
Tractor Tire inflation should be checked at
recommended intervals to ensure tire inflation is
to specifications.
Front - 28 psi
Rear - 12 psi
Unequal rear tire inflation can result in bucket
not being level to the ground.
Front tires should be maintained at maximum
recommended inflation to maintain normal tire
profile with added weight of loader/material.
A
kCAUTION. The tractor/loader should only be
operated with all safety equipment properly in­
stalled.
50-1