Troy-Bilt 14066 - Manual (Page 5)

CHICICLISTS
Delivery Checklist Cont’d.
_______ Advise customer of safety hazards involved when operating the tractor and loac to
“Safety Precautions” section of manual.
Advise customer of the importance of adding proper rear wheel weights Kit No, 3C 502 to
rear wheels of tractor to compensate for additional weight being added to front end when
loader is installed. Kit No.30902 provides only the minimum rear wheel weight reauiraments.
Explain proper operation of the loader and its controls to the customer.
Give Operator’s Manual to the customer and ask him to familiarize himself with aii sections.
Explain to the customer that when the tractor and loader combination is transported on public
roads and highways at night or during the day, accessory lights, warning devices or a Slow
Moving Vehicle emblem should be used to properly warn operators of other vehicles. Check
with local law enforcement officials for specific regulations.
(3) Beginning Each Season Checklist
Check ail hydraulic hoses, lines and fittings to be sure they are tight and not leaking. Replace
any worn or damaged parts.
Check hydraulic fluid level and add as required. Use Type “A” Hydraulic Fluid or Equivalent.
Operate loader by raising and lowering lift arms and extending and retracting bucket cylinders.
Check all hydraulic cylinders for leakage around seals. Repair as required.
Review “Safety Precautions” Section of manual.
Make sure loader has been completely lubricated per “Lubrication” section prior to beginning
operation.
Check all bolts on loader mounting frame to be sure they are properly tightened to specified
torque value.
Check for any special attachment which will help you do a better job.
20-2