Troy-Bilt 14066 - Manual (Page 9)

SAFETY
Safety Precautions
Do not carry round bales on loader unless loader Is equipped with a restraining device to prevent caie frc:n
rolling down loader frame, resulting in severe injury or death to the operator.
Always use adequate lights or safety warnings when transporting machine on public roads and a.de' ca;k.
Be certain SMV emblem is visibie. Check with your local law enforcemeni agencies for soec fic re­
quirements.
Avoid loose fill, rocks and holes; they can be dangerous for loader operaiicn or movemeri.
Be careful when working on inclines.
Allow for the loader length when making turns.
Before disconnecting hydraulic lines, relieve all hydraulic pressure. Escaping hydraulic oii under pressure
can have sufficient force to penetrate the skin, causing serious personal injury.
If injured by escaping fluid, obtain medical treatment immediately.
Do not operate the loader if the fittings are leaking or if the hoses are damaged. A sudden line burst would
cause the loader to drop suddenly, causing Injury to personnel or damage to the tractor or ioader.
A ioader bucket or attachment should be transported in a low position at slow ground speeds, especially if
the ground is irregular. Make turns slowly and use the tractor brakes cautiously. A fuii bucket in the raised
position alters the center of gravity location of the machine and increases the possibility of mishaps.
Lower all components before leaving the machine. All attachments should be in closed position and
Bucket resting on Ground. Elevated components can fall and cause serious injury.
Never work beneath a raised loader unless it is securely blocked with a safety bar. A suitable safety bar can
be fabricated following dimensions in the-illustration below.
Fig.3
30-4