Ant+ sensors, Pairing your ant+ sensors – Garmin Edge 800 User Manual
Page 15
Edge 800 Owner’s Manual
11
ANT+ Sensors
ANT+ Sensors
The Edge is compatible with the
following ANT+ accessories:
• Heart rate monitor (
)
• GSC 10 speed and cadence sensor
(
)
• Third-party ANT+ sensors
(
)
For information about purchasing
additional accessories, go to
Pairing Your ANT+
Sensors
Before you can pair, you must put on
the heart rate monitor or install the
sensor. See the Edge 800 Quick Start
Manual or the accessory package for
instructions.
• Make sure that the ANT+ sensor
is compatible with your Garmin
device.
• Bring the Edge within range (3 m)
of the accessory.
Stay 10 m away from other ANT+
sensors while pairing.
• After you pair the first time, your
Garmin device automatically
recognizes the ANT+ sensor each
time it is activated. This process
occurs automatically when you
turn on the Garmin device and
only takes a few seconds when
the sensors are activated and
functioning correctly.
• When paired, your Garmin device
only receives data from your
sensor, and you can go near other
sensors.