Garmin Edge 800 User Manual
Page 56
52
Edge 800 Owner’s Manual
Appendix
Problem
Solution
How do I know my Edge
is in USB mass storage
mode?
You should see a new removable disk drive in My Computer on
Windows computers and a mounted volume on Mac computers.
My Edge is connected to
the computer, but it will
not go into mass storage
mode.
You may have loaded a corrupted file.
1. Disconnect the Edge from your computer.
2. Turn off the Edge.
3. Press and hold
rESET while you connect the Edge to your
computer.
Continue pressing
rESET for 10 seconds or until the Edge
goes into mass storage mode.
I cannot see any new
removable drives in my
list of drives.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your Garmin
drives. See the Help file for your operating system to learn how to
assign drive letters.
My course, route, or
track file was renamed.
You can load .tcx, .gpx, and .crs files to the Edge. When you
select the course for any reason, the file is converted to a .fit
course file.
I cannot find the
waypoint I transferred to
the device.
Waypoints are converted and added your locations.fit file. Select
MENU > where To? > Locations.
Some of my data is
missing from my
Edge history.
When the Edge memory is full, it will no longer record data.
Transfer data to your computer regularly to avoid losing data.
I need to replace the
bands for the mount.
, or contact your Garmin dealer.
Purchase bands made of EPDM only.