Garmin Edge 800 User Manual
Page 40
36
Edge 800 Owner’s Manual
Settings
1. Select MENU > > Bike
Settings > Auto Lap > Auto Lap
Trigger.
2. Select By Position.
3. Select Lap At.
4. Select an option:
• Select Lap Press Only to
trigger the lap counter each time
you press LAP and each time
you pass any of those locations
again.
• Select Start And Lap to
trigger the lap counter at the
GPS location where you press
START and at any location
during the ride where you press
LAP.
• Select Mark And Lap to trigger
the lap counter at a specific GPS
location marked before the ride
and at any location during the
ride where you press LAP.
5. If necessary, customize the lap data
fields (
).
Marking Laps by Distance
You can use Auto Lap to automatically
mark the lap at a specific distance. This
feature is helpful for comparing your
performance over different parts of a
ride (for example, every 10 miles or 40
kilometers).
1. Select MENU > > Bike
Settings > Auto Lap > Auto Lap
Trigger.
2. Select By Distance.
3. Select Lap At.
4. Enter a value.
5. If necessary, customize the lap data
fields (
).