Cres Cor CCBC-4-35 - Manual (Page 11)

[ Page 9]
Control Panel For
CCBC-4-35
1. Select Chill Mode
2. Select Hard or Soft Blast
3. Select Timer for probe or time of process
4. When satisfied with selections, press Check to Start Cycle
5. Press if you want to erase and start
programming over
Control Panel For
CCBC-12-75 & CCBC-12-UA-100
1. Select Chill Mode
2. Select Hard or Soft Blast
3. Select Timer for probe or time of process
4. When satisfied with selections, press Check to Start Cycle
5. Press if you want to erase and start
programming over
Cabinet Temperature or "DEF" when in Defrost cycle
Probe Temperature Displayed
Cabinet Temperature or "DEF" when in Defrost cycle
Probe Temperature Displayed