Cables to Go TE100-S55 - Manual (Page 21)

21
Chapter 3 Configuring the
Switch
Introduction
The TE100-S55 is designed to operate with or without the aid of
extensive network management software. For simple
management, you can run a terminal emulation program and
access the TE100-S55 through its RS-232 port. For elaborate
SNMP management, you can run the XPressView program from
any network station. Chapter 4 describes the details of how to
install and utilize the XPressView SNMP Management program.
Out-of-Band Management is the vehicle to access TE100-S55
locally or remotely via its RS-232 serial port. Through this port,
you can set up, monitor or modify the TE100-S55 configuration.