Cables to Go TE100-S55 - Manual (Page 22)

22
Out-of-Band Management
A TTACHING TO THE RS-232 P ORT
The TE100-S55 can be configured using the Out-of-Band
Management function. To begin, you must first connect a PC (or
a terminal) directly to TE100-S55 using the supplied RS-232
serial cable.
The RS-232 port is a DCE with a 9-pin female connector.
Figure Chapter 3 -1 shows the cable connection to a DTE such
as a PC running VT100 terminal emulation software or an actual
VT100 terminal. The switch-to-terminal (DCE/DTE) serial
communication speed is preset at 19,200 baud.
Refer to Appendix B for detailed pin specifications of the RS-232
port.
Figure Chapter 3 -1, RS-232 connection to a local
terminal