Cables to Go TE100-S55 - Manual (Page 23)

23
VT100 T
ERMINAL
Once you’ve connected a PC (or terminal) to the RS-232 port of
the TE100-S55, you can begin the VT100 terminal emulation
process. The VT100 terminal emulation software can be found in
Microsoft Windows or any other communication software.
Table 3-1 describe the necessary settings for your PC or terminal
connection to TE100-S55.
Terminal Step VT100 Compatible
terminal
PCVT100 terminal
emulation
Communication
software Turn on the machine
and login as VT100
terminal
Run the VT100 Terminal
emulation software / This
software can be found in MS
Windows (Accessory section )or
other communication software
DCE/DTE line
setting 19,200 Baud, 8 N 1
(hardware setting) 19,200 Baud, 8 N 1
(through the Terminal software)
PC COM port
hardware
setting N/A Refer to PC COM port hardware
and Software setup guidelines
Assigning
control keys to
a non-VT100
system software
environment N/A If your keyboard does not
respond properly within the MS
Terminal Emulation program, go
to the Terminal Preference menu
and Deselect the “Use function,
arrow, Ctrl keys for Windows”
option; or refer to specific
terminal emulation software
Table Chapter 3 -1, VT100 Terminal Emulation Settings