Cables to Go TE100-S55 - Manual (Page 42)

42
System Status LEDs
TE100-S55 is equipped with eight Status LEDs which reflect the
Power-On Self Test results. If there is a system error, the Status
LED light will be ON and the LEDs - will display the
error code.
Although some errors may be resolved easily, some errors may
require that the unit be returned to TRENDware reseller for
repair.
System error LED
Off -
On -
Error
Status
Action
No error Normal
Boot
Record LED error code and
contact technical support
RAM
Record LED error code and
return the unit.
Interrupt
controller Record LED error code and
return the unit.
Timer
controller Record LED error code and
return the unit.
Cache
controller Record LED error code and
return the unit.
RS-232 port
Record LED error code and
return the unit.
BIOS
Record LED error code and
contact technical support
EEPROM
Record LED error code and
contact technical support
Program
down-load
Record LED error code and
contact technical support
Port error LED
LED is
reserved.
1 2 3 4 5
port position
Port 1 - 5
error (s) The system board is OK; the
reported port(s) is disabled.
Record LED status and
contact technical support.