Step, 2 - fixed leg/side table assembly – Aussie LP 7462 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 2- FIXED LEG/SIDE TABLE ASSEMBLY TOOLS:
------
p
f=>j===o
^ OR-—
(ITEM 1, 3, OR 4) SIDE TABLE
(ITEM 10) 8 pcs
1/4»
X
1 3/8” BOLT
(ITEM 9) 8 pcs
1/4”
X
1” BOLT
(ITEM 14) FRONT FIXED LEG - METAL
(ITEM 11) REAR FIXED LEG - WOOD
(ITEM 13) REAR FIXED LEG - METAL
1
•In the same way, attach the Front and Rear Fixed Legs to the remaining Side Table using 1/4" x 1”
Bolts (1/4" X 1 3/8” for Metai Legs.)
•On models with wooden legs, be sure to position Fixed Legs with the four large recessed holes facing away from Side
Table (Fig. C) and the two threaded holes in edge of each leg pointing outward. (Fig. D) Do not tighten bolts
completely, (Metai Tubing Legs can be oriented either way.)