Aussie LP 7462 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 13-ATTACH HANDLE AND HEAT INDICATOR TO HOOD - BON2A MODELS
(ITEM 44 ACTUAL SIZE)
6mm X 90mm BOLT
2 pcs
(ITEM 46) HANDLE SPACER
2 pcs
(ITEM 49) LOCKWASHER
2 pcs
2 pcs
(ITEM 50) 10-24 HEX NUT
2 pcs
TOOLS:
-
(ITEM 45) HOOD HANDLE
(ITEM 48) HEAT INDICATOR
•Insert two 6mnn x 90mm Bolts through recessed holes of Hood Handle, through Handle Spacers,
into front of hood and secure with 6mm Locknuts. Be sure to place the wide end of Spacer against
the Hood. Do not overtighten or you may crack Hood finish.
•insert Heat indicator studs into
Hood holes and secure using two
Lockwashers and two 10-24
Hexnuts. Do not overtighten or you
may crack Hood finish.
LOCKNUT
LOCKWASHER 10-24 HEX NUT
22