Step 14-attach lp cylinder to grill - (all models), Fig. l, Step 14“ attach lp cylinder to grill – Aussie LP 7462 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 14-ATTACH LP CYLINDER TO GRILL -
(ALL
MODELS)
•Fiii empty LP Cylinder at your local LP gas supplier.
•Set bottom ring of LP Cylinder into Cylinder Bracket through round hole in Bottom Shelf (Fig. K ).
Turn Adjusting Knob clockwise to secure LP Cylinder inside Cylinder Bracket(Fig. K).
•Turn ail control knobs and LP Cylinder valve to the “Off’ position.
•Take the protective cap off the cylinder valve. (Fig. L) Hold Regulator in a straight line with LP
Cylinder valve so the connection does not cross thread. Insert nipple into the cylinder valve. Hand
tighten coupling nut in clockwise direction. Do not use tools.
•Make sure Regulator hose does not contact hot metal surfaces.
^ WARNING: Do not use grill if this connection can not be completed. Be sure to test
this connection for gas leaks before operation of Gas Grill.
ROUTE HOSE UNDER
BRACE ON MODELS
WITH WOODEN LEGS
LP
CYLINDER
ADJUSTING
KNOB
REGULATOR
TURN REGULATOR COUPLING
NUT CLOCKWISE TO TIGHTEN
ROUTE HOSE ON
OUTSIDE OF LEGON
ALL MODELS
FIG. K
GAS
VALVE
FIG. L
PROTECTIVE CAP