ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS - Manual (Page 14)

Quick Start (cont’d)
To view current alarms, perform the following steps:
1 Using the operating panel’s numeric keypad, enter a valid ID code to
display the Action Menu 1 (see page 19) if no burglary groups are on; or
press the “Turn off’ selector button (if burglary groups are on) to
deactivate all annunciating devices.
2 If any burglary groups are on, complete the steps under “Turning Off
Burglary Protection” in the SYSTEM OPERATION section. When all
burglary groups are off, press
Continue to display Action Menu 1.
3 Press See alarms to display the alarm type, point number, and
description.
4 Press Prev or Next to display additional alarms.
5 Press Quit to display Action Menu 1.
Entering Your Personal ID Number
The first step in performing any function within the FOCUS® 200 PLUS
system is to enter your personal six-digit ID number.
To enter a valid ID code, perform the following steps:
1 Enter your six-digit personal ID number. You should hear a short beep
after each digit is entered. After your number has been accepted, you will
hear a longer beep.
2 Now wait about 15 seconds and try to enter another, random six-digit
number. What happens now?
The number is recognized as an invalid ID code and the operating panel
will display “Code Incorrect, Try Again.”
3 If you make a mistake, press “Clear” to re-enter the number.
The operating panel is active for 10 seconds after a valid code is entered. You
must enter a menu selection within that time or the operating panel will
deactivate, requiring the input of a valid ID code again. Once you have
selected a menu item, however, the panel remains active for a full minute
before becoming inactive. This timeout feature automatically secures your
FOCUS® 200 PLUS security system in the event of a distraction or
emergency that causes you to step away from the operating panel.
14