System programming (cont’d) – ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System Programming (cont’d)
6. Use the
POS
(Cursor Position) keys to move the cursor to the right and
left through the description. Use the
CHR
(Character) keys to scroll
forward and backward through the character list (letters, numbers,
symbols, and spaces).
Similarly, you may change characters directly by using the alphanumeric
keypad, which is organized like the TouchTone dial on a telephone.
•
Letters are entered by pressing the key corresponding to them on the
keypad. Pressing a key once, twice, or three times enters the first,
second, or third letter shown on the button. For example, press the 5 key
three times to enter the letter L. The letters Q and Z are the fourth
letters for the 7 and 9 keys, respectively.
•
Numbers are entered by pressing the 0 key once to enter the number 0,
or by pressing the
0
key repeatedly to scroll through the numbers until
the correct one is displayed.
•
Spaces are entered by pressing the 1 key.
•
Symbols are entered by pressing the 1 key, then using the
CHR
(backward and forward) keys to scroll through the entire character set.
Hint: Scrolling through the entire alphabet will take less time if you hold
the keys down instead of pressing and releasing them.
52