ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS - Manual (Page 68)

System Operation (cont’d)
Bypass Selection Menu 2
► ◄ ? Bypassing: ◄
► ◄ Bypass points ► ◄
► ◄ See limits > ◄
► ◄ Quit Bypass VVS ► ◄
9. Press Bypass to bypass the point displayed and to display the “unbypass”
selector button.
10. To bypass additional points, repeat steps 8 and 9.
11. Press Quit to display Action Menu 1.
Unbypassing Protection Points
Complete steps 1 through 7 under Bypassing Protection Points. Then perform
the following steps:
8. Press Prev or Next to display the specific point to be unbypassed.
9. Press Unbypass to unbypass the point displayed and to display the
“Bypass” selector button.
10. To unbypass additional points, repeat steps 8 and 9.
11. Press Quit to display Action Menu 1.
Bypassing/Unbypassing Vault Vibration Sensors (WS)
Vault vibration sensors are sophisticated electronic sensors that are
sensitive to occupant and construction vibrations. If construction is
scheduled to end by the programmed "Latest Close Time," use the Bypass
WS feature to automatically bypass ALL WS detectors. ALL WS
detectors will be automatically unbypassed after 12 midnight. Complete
steps 1 through 6 under Bypassing Protection Points. Then perform the
following steps:
68