Tempo, Tune – ALESIS HR-16:B User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNE
The TUNE mode Is used to select the desired pitch for each drum pad, and the
click. When it Is pressed, its LEO will light, and the display will read:
CLICK
PITCH = 0
This display appears when TUNE is first pressed, and the display was not
previously in MIX or VOICE mode for a drum pad. It is used to select the pitch of
the click (metronome). The pitch amount can be changed with the slider,or the
+/- arrow buttons. The range is from -16 to +15. As with the voice mode,
pressing a drum pad will select that drum for pitch editing. Also like in voice
mode, changes made to drum pads are temporary until stored by holding RECORD
and pressing TUNE. See IMPORTANT NOTE under storing voice settings.
MIX
The MIX button is used to change the volume, panning, and output assignment of
each drum button. When MIX is pressed Its LED lights, and the display reads:
CLICK OUTPUT 1
VOL: 65 PAN:. ■
This display appears when MIX is first pressed, and the display was not
previously in VOICE or TUNE mode for a drum pad. It is used to select the output,
the volume, and the panning of the click (metronome). The output is selected
with the 1 and 2 buttons of the keypad to select stereo outputs 1 or 2,
respectively. The volume control is adjusted with the slider (00 to 99), and the
panning Is adjusted with the +/- arrow buttons. The panning is seven position,
and the display will show <3, <2, <1, <>, 1 >, 2>, or 3>. As with the voice mode,
pressing a drum pad will select that drum for mix editing. Also like in voice
mode, changes made to drum pads are temporary until stored by holding RECORD
and pressing MIX. See IMPORTANT NOTE under storing voice settings.
NOTE: The Volume slider on the front controls output 1 only.
TEMPO
The TEMPO button is used to change the tempo of a pattern or song. The tempo can
bo stored with a song, but not with a pattern. While in pattern mode, the tempo
remains at its previous setting until changed. While in song mode, the tempo
changes to the programmed tempo each time a tempo step is encountered within a
song. While in pattern mode, pressing the TEMPO button causes the TEMPO LED to
light, and results in the following display:
TEMPO = 1.2 0
BEATS PER MINUTE
Alesis HR-16 Instructions ..................................................................................................................................... Page 17