Erasing a single track, Erasing a song – ALESIS HR-16:B User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing a single TRACK
P™®!
*'’« EPIASE button (all track LEDs will light) and
track LEDs^^irnfm^^^^
m
® ®®'»='«'i.frack's LED will remain iit, and the other
ttacK Ltl^ will turn off. Additional tracks can be se ected, and their LEDs will coma on
Pressing RECORD will erase any selected tracks.
Erasmg selected Information (notes, pitchbsnd, Individual MIDI channel,
WMe hoWinn tho^PRAQP® h « ®
•“ ®''®®® °P'y sslected data from a part or track.
fWit« i ° "k
**'® P39® up and page down buttons below the LCD
display can be used to select specific functions. If the arrow buttons are used they will
scroll through the following choices backwards or forwards depending on which button is
ERASE PART 01
ERASE ONLY NOTES
ERASE PART 01
ERASE PITCHBEND
ERASE PART 01
ERASE AFTERTOUCH
ERASE PART 01
ERASE CONTROLERS
ERASE PART 01
ERASE PROG CHNGE
ERASE PART 01
ERASE SYSTEM EX.
ERASE PART 01
ERASE MiDI CH. 1
ERASE PART 01
ERASE MIDI CH. 2
I
thru channel 16
This feature makes it possible to erase specific data, such as the after touch on one track
without affecting the other data on that track or part. If erase after touch was selected and
RECORD was pressed without selecting a track, all after touch on all eight tracks of the
selected part would be erased.
Erasing
a
SONG
In SONG mode, holding the ERASE button will cause the following display:
Alesls MMT-8 Instructions ,