Midi channel, Receive midi drums – ALESIS HR-16:B User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

The +/- arrows and the SELECT slider can be used to select a new tempo or a

tempo can be entered directly with three digits on the keypad. Tempo changes are
effective as soon as they are entered, and the RECORD button does not have to be
pressed.

In SONG mode, the tempo Is displayed as a relative amount of change from the pre­

programmed song tempo. The display reads:

SONG TEMPO 100%

TEMPO = 120

The current tempo (the one most recently recalled within a song) will be
displayed in the lower display, and the upper display shows the percentage of
programmed tempos to be used. The keypad can be used to enter a three-digit

number, or the +/- arrow buttons can be used to increment or decrement the

atnount. The range of the shift Is 50% (half tempo) to 200% (double tempo).

This change is shown as a percentage so that any tempo changes that occur in the
song will keep their time ratios constant.

MIDI / UTIL

The MIDI / UTIL button is used to access a number of miscellaneous functions that

usually do not need to be accessed very often. The functions are scrolled through

with the SELECT slider, with the display showing the current function, and each

function being numbered for easy reference. The keypad and +/- arrow buttons

are used to change the parameters. All of these parameters are global parameters,

e.g., they are set once for the entire machine and are not programmable for each
pattern or song. The pages are as follows:

MIDI CHANNEL

The first MIDI UTIL page is MIDI CHANNEL. The display looks like this:

01 SET MIDI

CHANNEL: Q1

The keypad and +/- buttons can be used to change the MIDI channel from 01 to 16.

This sets the MIDI channel that the HR-16 will transmit and receive on. If 00 is
selected, the display will read OMNI. In OMNI mode, the HR-16 will transmit on
channel 1, and will receive on all channels. The default is OMNI.

RECEIVE MIDI DRUMS

The RECEIVE MIDI DRUMS function Is used to determine whether or not incoming

MIDI notes from a sequencer, keyboard, or MIDI drum pad controller should

trigger the drums. The display looks like this:

Alesis HR-16 Instiuctlons ..................................................................................................................................... Page 18

Advertising
This manual is related to the following products: