ALESIS HR-16:B - Manual (Page 63)

This remains until the RECORD button is released. In both song and part mode, the tempo
can be changed while playing.
MIDI FILTER
The MIDI FILTER button is used to select what type of MIDI information will be recorded by
the MMT-8. While holding down the MIDI FILTER button, the page up and page down
buttons can be used to scroll through the possible choices, while the + and - buttons can
be used to turn each function on or off. The possible displays that can be scrolled through
are as follows:
RECORD MIDI
NOTES:
ON
RECORD MIDI
PITCH BEND: QN
RECORD MIDI
AFTER TOUCH: OFF
RECORD MIDI
CONTROLLERS: QN
RECORD MIDI
PROG CHANGE: ON
RECORD MIDI
SYSTEM EXCL: QFF
RECORD ON MIDI
CHANNEL: ALL
Pressing the + button changes the display to ON, pressing the - button changes the
display to OFF. If a function is off, it will not be recorded into the MMT-8, and will not be
echoed out the MIDI OUT jack if MIDI ECHO is on. The last page selects which MIDI
channel the MMT-8 will record. Normally, it is set to ALL, which means that it will record on
all MIDI channels. It can also be set to 1 through 16, which will cause the MMT-8 to ignore
ali channels but the selected one while recording. Selecting 00 on the keypad wili display
ALL, and the individual channels can be selected as 01 through 16. The default settings
are as shown above, with all functions on except after touch and system exclusive.
CLOCK
The CLOCK button is used to set the clock input and output functions of the MMT-8.
Pressing and holding the CLOCK button allows access to the CLOCK pages. The first
page is used to select the clocking source, and will display one of the following choices:
CLOCK SOURCE:
MIDI & INTERNAL
Alesis MMT-8 Instructions ,