AGA G.C.P.V. User Manual
AGA Stoves
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4/01 EINS 511502
Gas Fired Cookers
Tx.’itjw;
Installation Instructions for
Aga Gas Power Vent Fired Range
Models: G.C. P.V. (2 Oven) N.G. and LP.G,
G.E. P.V. (4 Oven)
For U.S. and Candían Markets
NOTE: THESE INSTALLATION INSTRUCTIONS SHOULD BE LEFT WITH THE APPLIANCE AND THE USER
TO RETAIN FOR FUTURE REFERENCE.
The Gas fired ranges are delivered unassembled. Before installation can be made, the site is inspected for
suitability by an Authorised Aga Distributor and corrected where necessary to conform with local installation codes
or in the absence of local codes with:
In Canada:
The CAN/CGA-B149 installation codes
In U.S.:
The National Fuel Gas Code ANSI Z223 1-latest edition.
Assembly is undertaken on site by the same Aga Distributor to ensure correct performance and safety.
INSTALLATION
It is essential that the base or hearth on which the range stands should be level and strong enough to support the
weight of the range.
Approximate weights;
Models G.C. - 406kg (9001b)
G.E, -585kg (12901b)
The top face of the hearth must be of non-combustible material for a minimum thickness of 12mm (1/2) and
comply with the current Building Regulations and National Fire Laws,
The location must also provide adequate space for servicing and air circulation around the range.