Vent system – AGA G.C.P.V. User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
VENT SYSTEM
Products of combustion discharge is by a fan powered vent pipe 50mm (2in) diameter which can reach up to 6
metres (19.5ft) in length through a maximum of 6 x 90“ bends or 9 metres (29ft) with one bend. Exits from the
appliance can be from rear L.H. or R.H. sides, from the rear centre or from the under side (Figs. 2 & 3).
The vent pipe should exit through the outside wall fixing plate by 25mm (1 in) Fig, 1.
Advertising