AGA G.C.P.V. User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
OFF
^ ìGNITiON
WHITE BLOCK
LOW FIRE
GREEN BAND
NORMAL RUNNING
6. After 30 minutes, check the burner gas pressure, (i) Turn the gas control knob 2 to PILOT position (see Fig^).
Remove the main burner pressure test nipple plug 5 and fit pressure gauge. Turn gas valve control knob 2 to the
mid position of the green band.
(ii) Check burner pressure correctly corresponds to the data plate.
(iii) Cheok that the gas pressure is unaffected to the main burner when other gas appliances are used.
(iv) Turn gas valve control knob 2 to PILOT (see Fig. B). Remove the pressure gauge and replace gas nipple
Advertising