AEG TURBO 1480 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Positioning
10
Set the machine upright and unscrew the remaining two bolts on
the back.
Remove the three plastic pins from the holes in which the bolts
were fitted.
Blank off the holes with the plastic plugs supplied, which you will
find in the bag with the instruction book.
Hint:
Keep all transit devices for re-use in case you move house.
The machine stands on four adjustable rubber feet which can be
used to compensate any unevenness in the floor or to adjust the
machine to the correct height.
Advertising