Drying time selector button, Cooling phase, O o o – AEG TURBO 1480 User Manual

Page 31: O o 0 o o, Selecting the drying programme

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Selecting the drying programme

ON

OFF

DELAY

TIMER

DRYING

TIME 700 900 1200 1400

SPIN

©o O

O o 0 o o

O

EXTRA CUPBOARD IRON

DRY

DRY

#

D

r

RY

1

O O o

Time controlled drying

If you wish to carry out a drying cycle on its own, turn the pro­

gramme selector knob to DRYING. This is possible only in the
sector for cottons and easy care fabrics. Digit 10 will appear in the

display.

DRYING TIME selector button

With this button, the drying time can be adjusted in 5 minute

increments, up to a maximum of 130 minutes for cottons and col­
oureds, or up to a maximum of 100 minutes for easy care fabrics.

The time selected appears on the display next to the button.
When selecting the drying time, take into account the type of fab­

ric to be dried (cottons, coloureds, easy cares) and the degree of

drying required (extra dry, cupboard dry, iron dry).

Refer to the chart.

When selecting the drying time, you should also remember that it

includes a 10 minute cooling phase.

For example, if you select a drying time of 60 minutes, the

machine will dry for 50 minutes and will then cool for the remain­

ing 10 minutes.

As soon as the drying programme is started, the display shows
the remaining time, counting down in minutes.

If you wish to delay the programme start, select the desired time

by depressing the relevant button and then depress the START/
PAUSE button.

Cooling phase

10 minutes before the end of the cycle, an automatic cooling

phase is carried out to cool the laundry.

This phase cannot be shortened, stopped or avoided, as this

could cause skin burns or damage to the laundry.

Drying only

31

Advertising