Aiwa VX-S135U - Manual (Page 13)

Checking the channel set-up
to use VCR Plus+ system
To set the timer using VCR Plus+ system, you have to check
whether the VCR channel numbers match the guide
channels which are assigned to the TV stations.
If they do not match, the VCR Plus+ system does not
function correctly. In this case, coordinate the number.
TV VCR/CATV
ENTER
CANCEL
For example
For each channel your VCR receives, use the channel line
ujo chart to check that tfie channel numbers match. For
example, SHOWTIME is listed in the channel line up chart
(under the VCR Plus+ Code) as channel 38, your VCR
receives SHOWTIME on channel 14, you need to coordinate
these numbers by locating guide channel 38 (under GUIDE
CH). Next enter your SHOWTIME channel 14 (under VCR
CH).
Continue this process until all channels match.
Sample Channel Line Up Chart
TV station VCR Pius+
Code
Local Cable Company
Channel Number
WCBS New York CBS 02 02
WNBC New York NBC 04 04
WNYW New York NYW 05 05
WABC New York ABC 07 07
A&E Arts & Entertainment 39 44
BET Black Entertainment 57 23
CNBC Consumer News & Business 23 16
CSPAN Government Business 28 54
DSC Discovery Channel 37 63
DIS Disney Channel 53 27
MAX Cinemax 45 15
SHO Showtime 38 14
USA USA Network 44 40
Channel Guide listings are available in your local TV Guide
and Newspaper.
Before starting
Set the TV VCR/CATV selector to TV VCR.
1
Press MENU.
2
Press SET/TRACKING+/- to select CH SET-UP,
then press ENTER.
M E N U
■ TIMER REG SET
i/V SET-UP
SET-UP
S auto repeat on ► off
■ SYSTEM SET-UP
<+/-/ENTER/MENU>
3
Press SET/TRACKING+/- to select GUIDE CH
SET, then press ENTER.
OH SET-UP
■ TV ►CATV
■ AUTO OH MEMORY
.»/DD/DELETE
ReUIDE CH SET
<-^/-/ENTER/MENU>
Press SET/TRACKING+/- or the number
buttons to select GUIDE CH “38,” then press
ENTER.
When selecting the number between 10 and 19 using
the number buttons, press 0 once to enter the hundreds
digit, and then press the buttons 1 through 9 to enter
tens and ones digits.
When selecting the numbers less than 10 using the
number buttons, press 0 twice to enter the hundreds and
tens digits, and then press the buttons 1 through 9 to
enter the ones digit.
GUIDE CH SET
GUIDE VCR
CH CH
•>f,k -
038
<0-9/ + /-/ENTER/MENU>
5
Press SET/TRACKING+/- or the number
buttons to display CHANNEL “14,” then press
ENTER.
When you use the number buttons, select the number in
the same way as in step 4.
GUIDE CH SET
GUIDE
CH
VCR
CH
4k
<0-9/-^/-/ENTER/MENU>
6 Repeat steps 4 and 5 until all necessary
channel numbers are set.
7
Press MENU 3 times to return to the normal
screen.
Tip
To cancel the VCR CH setting, press CANCEL in step 5.
ENGLISH
1 2