Aiwa VX-S135U - Manual (Page 28)

Setting the timer manually
If you cannot use VCR PLUS+ system, you can set the timer
manually.
You can set up to 8 programs within one month of the
current date.
TVVCR/CATV
T-REC
ENTER
CANCEL
MENU
SET/TRACKING '
+/-
Before starting
• Check that the clock is set correctly.
• Insert a cassette with its erasure prevention tab in place.
• Set the TV VCR/CATV selector to TV VCR.
• If the CATV converter is used for the timer recording,
check that the CATV converter is turned on and the
channel you want to record is selected.
1 Press MENU.
2
Press SET/TRACKING+/-
SET, then press ENTER.
to select TIMER REC
{ M E N U
;i"FIMER REC SET
a TV SET-UP
■ CH SET-UP
■ AUTO REPEAT ON ►OFF
■ SYSTEM SET-UP
<+/-/ENTER/MENU>
3
Press SET/TRACKING +/- to select the line on
which no program has been set, then press
ENTER.
Ч I 1 I i I I I I I i I I I I I l x
И-И H+l l-H I-''
< + /-/ ENTER/CANCEL / MENU>
4
Press SET/TRACKING +/- to set the date, then
press ENTER.
If you want to set daily/weekly recordings,
see on the right.
TIMER REC SET
\ 1 1 1 1
DATE -~21(MON)—
START ■'iSiBaAMv
END — : —
CH Oil
SPEED SP
< + /-/ ENTER/CANCEL / MENU>
3 Set the start time (hours and minutes), the end
time (hours and minutes), the channei number
and the tape speed in the same way as in step 4.
• To change the minutes setting in ten minutes, press
and hold SET/TRACKING +/-.
• The timer program list appears.
6 if you want to set another program, repeat
steps 3 through 5.
7
Press MENU twice to return to the normai
screen.
8
Press T-REC.
• The TIMER REC indicator on the unit lights, and the
unit stands by for timer recording.
• If the TIMER REC indicator does not light, a cassette is
not inserted.
• The cassette is ejected if the cassette’s erasure
prevention tab has been removed.
• You can turn the unit off. The unit automatically starts
recording at the programmed time.
To set the daily/weekly timer
In step 4, press SET/TRACKING - repeatedly before
pressing ENTER.
The setting changes as follows:
Example
SUN-SAT (Sunday to Saturday)
4-
The current day (Sunday)
t
One month later
minus two days
t
One month later
minus one days
t
WKL-SUN (Every Sunday)
MON-SAT (Monday to Saturday)
i
MON-FRI (Monday to Friday)
4-
WKL-SAT (Every Saturday)
4-
WKL-FRI (Every Friday)
Press SET/TRACKING + to change the display in reverse
order.
After setting, press ENTER.
To cancel a program
Select TIMER REC SET in the menu. And press SET/
TRACKING- h /- to select the unnecessary program, then
press CANCEL.
Tips
• If you want to record the program through the line input,
press SET/TRACKING +/- to display “L1 ” (from the AUDIO/
VIDEO IN jacks on the rear) or “L2” (from the AUDIO/VIDEO
IN jacks on the front) in step 5 instead of the channel
number.
• To confirm the setting, select TIMER REC SET in the menu
to display the timer program list. Press MENU twice to return
to the normal screen.
• When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and timer again.
When the TIMER REC indicator lights, the tape functions
are not operable. To operate the others, press T-REC.
However, remember to press it again to activate timer
recordings.
27
ENGLISH