Aiwa VX-S135U - Manual (Page 27)

3
Press SET/TRACKING +/- to select ONCE,
DAILY or WEEKLY.
To record Select
a single program ONCE
daily program DAILY
(See right)
weekly program such as every
Monday (WKL-MON)
WEEKLY
Press ENTER.
• The following timer information appears on the
screen.
• If you want to change the setting here, see on the
right.
PLUSCODE 1 23------------------
\ 1 i 1 1
DATE — 21(MON) —
START ÉiüdPií'-
END 7:00PM
CH 023
SPEED SP
< + /-/ENTER/CANCIEL/ MENU>
5 Press ENTER repeatedly until the tape speed
flashes, then press SET/TRACKING +/- to
select SP, LP or SLP.
PLUSCODE 1 23
DATE 21{MON)
START 6:30PM
END 7:00PM
CH
9 M -
SPEED
^ 1 V -
< + /-/ ENTER /CANCEL / MENU>
6 Press VCR PLUS+.
The timer program list appears.
x j n u c t $:|3|PMr
^-l-H-1 i i - H I-
ctifiM I0Í31
-H l-H
<+/-/ENTER/CANC EL/MENU>
7
Press MENU twice to return to the normal
screen.
8 Press T-REC.
• The TIMER REC indicator on the unit lights, and the
unit stands by for timer recording.
" If the TIMER REC indicator does not light, a cassette is
not inserted.
" The cassette is ejected if the cassette’s erasure
prevention tab has been removed.
" You can turn the unit off. The unit automatically starts
recording at the programmed time.
To cancel a program
Select TIMER REC SET in the menu. Then press SET/
TRACKING +/- to select the unnecessary program, and
press CANCEL.
If the program overlaps another
The overlapped portions will be deleted. The program listed
first on the timer program setting screen has priority over
the succeeding program as illustrated.
8:00 9100 10:00 1i:00
Program 1 ■
Program 2 ■
Program 3 ■
Actual recorded
portions ■
Prog.1 Prog.2 Prog.3
Tips
• If "PROGRAM FULL" flashes and the timer program list on
step 1,8 programs are already set. Cancel an unnecessary
program.
• To confirm the setting, select TIMER REC SET in the menu
to display the timer program list. Press MENU twice to return
to the normal screen.
• When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and the timer again.
During timer recording, when the tape reaches the end, the
TIMER REC indicator on the unit flashes.
Changing the setting
To set the daily program
In step 4, press SET/TRACKING+/- repeatedly to display
the desired daily program as follow:
MON-FRI : Monday to Friday
MON-SAT : Monday to Saturday
SUN - SAT : Everyday
PLUSCODE 1 23---------------
\ ! 1 1 1 /■
DATE «“MON-FRI—
START T" e:8dp|/i'*
END 7;00PM
CH 023
SPEED SP
<+/-/ENTER/CANCEL/MENU>
To extend the recording time
After step 4, press ENTER repeatedly until the end time
flashes, then press SET/TRACKING +/-to change the
setting.
When the TIMER REC indicator on the unit iights, the
tape functions are not operable. To operate the others,
press T-REC. However, remember to press it again to
activate timer recordings.
ENGLISH
26