AEG OKO FAVORIT 3130 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

-

Is there still special salt In the salt container? Without special salt, the water will

not be softened. At water hardnesses above 4 “d, lime deposits will form on

your dishes (see the section on "Fiiiing with speciai dishwasher salt").

-

Have you set the water softener to the local water hardness? (see the section

on “Setting the water softening system").

□ The dishes do not dry and have no sparkle.

- Have you used a branded rinse aid?
-

Is there sufficient rinse aid in the dispenser? (see the section on “Filling with

rinse aid").

Glasses and dishes have shwks, stripes, milky blotches, or blue-

coloured blooms.

- The rinse aid is being overdosed. Set a lower rinse aid dosage (see the sectiori

on “Setting the rinse aid quantity to be dosed").

□ Glasses and dishes have dried-on water drops.
-

Therinseaidisbeingunderdosed.Setahigherrinseaiddosc^e(seethesection

on "Setting the rinse aid quantity to be dosed”).

- The detergent may be the cause. Contact your detergent manufacturer’s con­

sumer services manager.

□ Rust marks can be seen inside your machine.

- The dishwasher interior is made of stainless steel. If rust is found inside your

dishwasher, this must be from another source (rust in water, from saucepans,
cutlery, etc.). Remove such marks with a commercially available stainless steel
cleaner.

-

Have you dosed the detergent correctly? (see the section on ‘'Filling with

detergent").

-

Is the lid of the salt container closed properly? (see the section on "Filling with

special dishwasher salt").

-

Have you set the water softener correctly? (see the section on "Setting the

water softening system").

w

S

70

Advertising