AEG OKO FAVORIT 3130 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The original worktops of free-standing machines are around 2 cm depth-ad
justable. This enables the worktop to be adjusted to adjacent applicances or
furniture.
a To make an adjustment, unscrew both screws from the worktop on the machine
back.
□ Slide the worktop forwards or backwards as required.
□ Re-insert and tighten both screws.
Free-standing machines can be installed under a continuous worktop if
the original worktop of the machine is removed.
Installing free-standing machines under a continuous worktop
□ To do this, unscrew both screws securing the worktop to the machine back,
a Push the worktop back with a slight jerk and detach.
Important: The plinth of free-standing machines is not adjustable.
To match the dishwasher to the kitchen decor, free-standing machines can be
provided with a decor panel.
Decor panels matching the kitchen decor must be ordered from the kitchen
manufacturers. A decor frame is needed for installation, if your free-standing
machine is not serially fitted with a decor frame, you can order this as a special
accessory from your specialist retailer.
Decor pane! dimensions: H 590 x В 581 mm
Clamping thickness:
max. 4 mm
T Decor panel
2 Doorframe
3 Decor frame
Fig. 24
AUF1
To make sure that thin decor panels do not sag or warp, you should fix them to
the machine door with double-sided adhesive tape.
75