Using the spice function, Spice a/b function, Using the fill in function – Aiwa NSX-A999 User Manual

Page 11: To select sounds, To use the fill in function, 1 press a, 3 in a similar way, select a sound for b, To actually use the function, Fill

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

After once synced up if the sync lock unlocks the display will

read “BEAT OUT,” and again the unit will try to get synced up.

At the occurrence of BEAT OUT the level of the rhythm is

automatically reduced to

“1

and it increases back to the preset

level when sync is achieved again.

USING THE SPICE FUNCTION

SPICE A/B function
The SPICE A/B function allows you to add percussion to the §
playback of the music and create your original sounds.

3

Your sounds created with SPICE A/B can be recorded on tape if

O

you want to.

The BEAT function can be used together with the SPICE A/B
function, as well as with the FILL IN function. (For these functions

see below.) But you cannot use the AUTO SPICE function at the
same time as the BEAT function.

Using the FILL IN function

The FILL IN function is used together with the BEAT function to

insert a variation of the current rhythm pattern.

The AUTO SPICE/FILL IN double function switch takes on the

FILL IN function when the BEAT function is switched On.

' The AUTO SPICE function is not available at the same time as

the FILL IN function.

' The FILL IN function is not availble when making a tape copy

between two tape decks using SYNC DUB.

To select sounds

To use the FILL IN function

■ BEAT ON/OFF

1

Press A.

You will hear the current sound stored in A.

2

Within 4 seconds, turn MULTI JOG to the left or

right until you find the desired sound.

As the display changes, you will hear the respective sound.

3 In a similar way, select a sound for B.

To actually use the function

Once you are satisfied with the sound selection, let the music
start playing, and hit SPICE A or B in time with the music as if to
play percussion instruments.

You cannot use the SPICE A/B function when making a tape

copy between two tape decks using SYNC DUB.

During playback with the BEAT function switched on, press FILL
IN at the desired moment.

FILL

.... IV^

The display will read “FILL IN” and, when the current cycle of the

rhythm pattern is over, you’ll hear a short sound different from

the rhythm pattern. This sound depends on rhythm patterns. If
you want, try to change the rhythm pattern. (Selecting a rhythm

pattern is discussed earlier, under the corresponding heading.)

ENGLISH

1

1

Advertising