Setting power economizing mode, 1 press eco, Ecu nudb – Aiwa NSX-A999 User Manual

Page 7: Channel multi-amplifier system, Built-in subwoofer system, 2 press enter within 4 seconds, Ecu ur-i

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2

3

SETTING POWER ECONOMIZING MODE

Setting this unit to power economizing mode reduces power

consumption as follows.
• When the power is turned off, all the display lights turn off.

However, if the clock is not set, the game Demo (page 8) will

begin when the power is turned off.

• If CD, Tape or Rhythm play function (page 9) does not play for

10 minutes or if there is no audio input from any connected

external equipment for 10 minutes when VIDEO/AUX or MD is
selected as the source, the power shuts off.

• When the power turns on due to timer recording (page 27), the

display brightness level is set to “DIMMER 3” (page 6), all button

lamps are off, and the volume is set to the minimum level (0).

• The display brightens only when operating the unit. When the

unit has not been used for 10 seconds, the brightness level

switches to the mode previously selected in “DIM MODE”. (Page

6

)

(If the display brightness level is set to “DIM-OFF”, the
brightness does not change. When the level is “DIMMER 3”,

the button lamps are also turned off.)

1 Press ECO.

“ECO MODE” will be displayed.

ECU nuDb.

4-Channel Multi-Amplifier System

To provide reinforcement for the ultra-low frequencies, in addition
to the Left/Right 2-channel amplifier used to reproduce mid-to-

high-range frequencies, this system incorporates a second L/R

2-channel amplifier just for reproduction of ultra-low frequencies
— making it, in effect, a 4-amplifier system. By utilizing discrete

amplifiers for mid to-high-frequencies and low frequencies, high-
quality sonic reproduction that is virtually free from distortion can
be realized.

This Multi Amplifier System, which utilizes independent circuitry
for the different frequency ranges, enables superb sonic

reproduction free from distortion.

Built-in Subwoofer System

The built-in subwoofer System has a separate subwoofer cavity
area that is part of the loudspeaker cabinet structure, which acts
as a sonic filter to cut distortion components. (In the Multi Amplifier
System, the ultra-low frequency signals transmitted from their
own independent amplifier are reproduced in this area.) This
separate construction gives a clear, rich definition to bass

reproduction and it can realize clear, well-defined mid-to-high

frequency signals.
And AlWA’s built-in subwoofer system incorporates a subwoofer
capable of powerful, satisfying bass performance with true stereo
separation.

Built-in Subwoofer

Multi-Amplifier

Amplifiers for Mid-to-high

range frequencies

(A
Z

o

H

<

a
<

Q.

Ill

IE

a

2 Press ENTER within 4 seconds.

The current power-economizing mode status will be displayed.

If the power-economizing mode is OFF: ECO OFF

If the power-economizing mode is ON: ECO ON

3 Turn MULTi JOG within 4 seconds to switch the

power-economizing mode on or off.

Example: When “ON” is selected

ECU Ur-i

The mode will be automatically set after 4 seconds. It will also

be set if ENTER is pressed within 4 seconds after step 3.

To view the clock when all the display lights turn off, press CLOCK

so that the time is displayed for 4 seconds.

ENGLISH 7

Advertising