Loading discs, To play one disc only, press disc direct play 1-3, To play with the remote control – Aiwa NSX-A999 User Manual

Page 18: To check the remaining time, Selecting a track with the remote control, Replacing discs during play, Playing discs, To play all discs in the disc compartment, press

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CD PLAYING

LOADING DISCS

Press CD, then press

±

OPEN/CLOSE to open the

disc compartment. Load disc(s) with the label side

up.

To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press DISC CHANGE to rotate the trays

after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing

±

OPEN/CLOSE.

Í

Tray 1

[J.............. ............

To play one disc only, press DISC DIRECT PLAY 1-3.

The selected disc is played once.

To play with the remote control

Press DISC DIRECT PLAY, then press numbered buttons 1l-,3

within 3 seconds to select a disc.

To stop play, press ■.
To pause play, press II. To resume play, press again.
To search for a particular point during playback, keep ◄N
or ►► pressed and release it at the desired point.
To skip to the beginning of a track during playback, press

◄◄ or ►► repeatedly or turn MULTI JOG.

To remove discs, press

±

OPEN/CLOSE.

To start play when the power is off (Direct Play Function)

Press CD. The power is turned on and play of the loaded disc(s)

begins.
When ^ OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.

To check the remaining time

During play, press CD EDIT/CHECK. The amount of time
remaining until ail tracks finish playing is displayed. To restore

the playing time display, repeat the above.

Selecting a track with the remote control

1 Press DISC DIRECT PLAY, then press numbered buttons

3 within 3 seconds to select a disc.

2 Press numbered buttons 0-9 and +10 to select a track.

Example:

To select the 25th track, press +10, +10 and 5.

To select the 10th track, press +10 and 0.

The selected track starts to play and continues to the end of
that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.

1 Press DISC CHANGE.

2 Remove the discs and replace with other discs.

3 Press

±,

OPEN/CLOSE to close the disc compartment.

Tray number of the
disc to be played Total playing time

Q

Total number of tracks

• When loading an 8-cm (3-inch) disc, put it onto the inner circle

of the tray.

• Do not place more than one compact disc on one disc tray.

• Do not tilt the unit with discs loaded. Doing so may cause

malfunctions.

• Do not use irregular shape CDs (example: heart-shaped,

octagonal ones). It may result in malfunctions.

PLAYING DISCS

Load discs.

To play all discs in the disc compartment, press

Play begins with the disc on tray 1.

Number of track being played Elapsed playing time

I

0 00-

1

8

ENGLISH

Advertising