Random /repeat play, Random play, Repeat play – Aiwa NSX-A999 User Manual

Page 19: Press random/repeat, 1 press prgm twice in stop mode, Blank skip play, 1 press cd blank skip, Cd blphk, 2 press ◄►to start playback, To return to normal playback

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RANDOM /REPEAT PLAY

Use the remote control.

RANDOM play

All the tracks on the selected disc or all the discs can be played

randomly.

REPEAT play

A single disc or all the discs can be played repeatedly.

Press RANDOM/REPEAT.

Each time it is pressed, the function can be selected cyclically.

RANDOM play — RANDOM lights up on the display.
REPEAT play — lights up on the display.

RANDOM/REPEAT play — RANDOM and C^. light up on the
display.

Cancel — RANDOM and disappear from the display.

To play all discs, press ◄►to start play.

To play a single disc, press DISC DIRECT PLAY, then press

numbered buttons 1-3 to start play.

During random play it is not possible to skip to the previously

played track with

<

Up to 30 tracks can be programmed from any of the inserted gj

discs.

Q

U

2,3

5

Use the remote control.

1

Press PRGM twice in stop mode.

“PRGM” is displayed .

PRGM

....... Pi;; 00

BLANK SKIP PLAY

The silent portions between tracks recorded on a CD can be

skipped during playback.

1

Press CD BLANK SKiP.

“CD BLANK SKIP ON” is displayed and a small dot appears

in the display.

Small dot

CD BLPHK

2 Press ◄►to start playback.

The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion also will be skipped.

To return to normal playback

Press CD BLANK SKIP again, and “CD BLANK SKIP OFF” is

displayed and the dot in the display disappears.

■There may be a case where BLANK SKIP PLAY does not

function correctly.

■ BLANK SKIP PLAY is automatically canceled when performing

Al EDIT RECORDING (page 22), PROGRAMMED EDIT

RECORDING (page 23), or recording during PROGRAMMED
PLAY (page 19) or RANDOM PLAY (page 19).

• When PRGM is pressed once in step 1, the unit enters the

KARAOKE PROGRAM (page 25).

Press DISC DIRECT PLAY, then press 1-3 within

3 seconds to seiect a disc.

Go to the next step when the tray stops rotating.

Press numbered buttons 0-9 and +10 to program

a track.

Example:

To select the 25th track, press +10, +10 and 5.

To select the 10th track, press +10 and 0.

Selected track number Total number of selected tracks

?0IV

P.

0i

Program number

I P

4i:26s

Total playing time

of the selected tracks

4

Repeat steps 2 and 3 to program other tracks.

5 Press ◄►to start play.

To check the program

Each time ◄◄ or ►► is pressed in stop mode, a disc number,

track number, and program number will be displayed.

To clear the program

Press ■ CLEAR in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed

after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

To play the programmed tracks repeatedly

After programming the tracks, press RANDOM/REPEAT

repeatedly until appears on the display.

• During programmed play, you cannot perform random play,

check the remaining time, and select a disc or track. “Can’t

USE” is displayed if you attempt to select a track.

• “FULL” is displayed if you attempt to program more than 30

tracks.

ENGLISH

1

9

Advertising