Memorizing the new equalization curves, 2 within 4 seconds, press enter, 4 within 4 seconds, press enter – Aiwa NSX-A999 User Manual
Page 14: To select the stored equalization curve, Selecting a programmed dsp surround mode, D1 sco, To display the current dsp surround mode, To cancel the selected mode, When the music source is monaural
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MEMORIZING THE NEW EQUALIZATION
CURVES
2
,
Up to 5 customized equalization curves can be stored as the
manual modes M1 - M5.
1
Go through steps 1-4 on previous page.
The created curve is displayed for 4 seconds.
2
Within 4 seconds, press ENTER.
“M I” flashes on the display for 4 seconds.
0EQ
m
• If this step is not completed within 4 seconds, press GEQ
firijt to display “GEQ ON”. Then within 4 seconds press
ENTER repeatedly until “M1 ” flashes.
3
Within 4 seconds, turn MULTI JOG to seiect one
of the manuai modes Ml - M5 to store the curve.
4
Within 4 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes M1 - M5 within 4 seconds.
The DSP (Digital Signal Processor) SURROUND adjusts the
delay time, the input mode and the feedback level to give a
resonant surround sound, allowing you to enjoy the real sound
presence of different environments.
This unit has been programmed with 5 different SURROUND
modes.
SELECTING
A
PROGRAMMED
DSP
SURROUND MODE
■MULTI
JOG
Five modes of DSP SURROUND offer the sound presence you’d
experience in disco (DISCO), at a live concert (LIVE), stadium
(STADIUM), in a concert hall (HALL) or movie theater (MOVIE).
(Shown in parentheses are indications appearing in the display.)
Press SURROUND, and turn MULTI JOG or press
or repeatedly to select the desired
programmed mode within 4 seconds.
D
1
SCO
“DSP SURROUND” appears and the DSP SURROUND mode is
displayed cyclically as follows.
MOVIE-
r
DISCO-
LIVE-
-STADIUM-
-HALL-*
:-*-n
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be manually selected or turned
off to suit your preference.
To display the current DSP SURROUND mode
Press SURROUND.The current mode is displayed for 4 seconds.
To cancel the selected mode
Press SURROUND twice. “DSP OFF” appears and “DSP
SURROUND” disappears.
When the music source is monaural
Select “LIVE”, “STADIUM” or “MOVIE” to obtain a simulated stereo
effect.
When “DISCO” or “HALL’ is selected, no sound will be heard
from the surround speakers.
1
4
ENGLISH