Aiwa NSX-A999 - Manual (Page 16)

TAPE PLAYBACK
• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use Type I (normal), Type II (high/Cr02) or Type IV (metal)
tapes for playback.
1 P ress TAPE DECK 1/2 and press ± PUSH EJECT
to open the cassette holder.
To select a reverse mode (deck 2 only)
Each time REV MODE (DECK2) is pressed, the reverse mode
changes.
T F 2
000W
1
ct :
To play one side only, select Tl.
To play from front side to reverse side once only, select D.
To play both sides repeatedly, select CZ).
• When tapes are loaded in both decks, Z) on the display
indicates Continuous Play.
To select a playing deck
When tapes are loaded in both decks, press TAPE DECK 1/2
first to select a deck.
The selected deck number is displayed.
To stop play, press ■.
To pause play (deck 2 only), press II. To resume play, press
again.
To change the playback side, press
in play or pause mode.
To fast forward or rewind, press ◄◄ or ►►.Then press ■ to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE DECK 1/2. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press ■ CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
InseT a tape with the exposed side down. Push the cassette
holder to close.
2 Press DOLBY NR and turn Dolby NR on or off to
match the playback tape.
3 Press ◄►to start play.
The tape counter indicates the
Playing deck number tape running length.
T P l
0000
Playback side indicator
The front side is being played (forward).
^1: The back side is being played (reverse).
16 ENGLISH